-
TCD2013 4V thermostat 04908226 04911831 04902572 87 ℃
The 04908226 thermostat is used as a backup and controls the flow path of the engine coolant. This 04908226 automatically adjusts the amount of water entering the radiator according to the temperature of the cooling water to ensure that the TCD2013 4V engine works within a suitable temperature range, which can save energy.
Send Email Details -
BFM1013 TCD2013 Thermostat Outlet 04256565 04206153
The 04256565 thermostat outlet plays the role of protecting the thermostat and is mainly made of aluminum alloy material.
Send Email Details -
BFM1013 TCD2013 BFM1012 Pressurestat 02111519 02111466
In order to avoid the occurrence of "over-pressurization", a wastegate device is designed on the turbocharger, which is composed of a control air chamber, a tie rod, a wastegate valve, etc. The control air chamber is the core component. , it is a pneumatic cylinder composed of a diaphragm and a spring, one end is connected to the compressor of the supercharger, the pressure above the diaphragm is equal to the pressure in the compressor, and the other end is connected to the wastegate valve.
Send Email Details -
TCD2012 TCD2013 Filter cartridge 04504438
The function of the 04504438 filter is to filter out these mechanical impurities and gums, keep the lubricating oil clean and prolong its service life. The oil filter should have the characteristics of strong filtering ability, small flow resistance and long service life.
Send Email Details -
TCD2013 L04 2V V-rib.belt pulley 04283985
Part number 04283985 water pump pulley is suitable to deutz TCD2013 model
Send Email Details
The outer diameter is 122 mm ,Inner diameter is 27.50 mm , the width is 41.00 mm ,there are three holes on the pulley
The function of the engine pulley is to transmit power. When there is an accessory belt, the power output from the crankshaft is transmitted to the water pump.
The coolant pump model matched with this pulley is 02937441 -
TCD2013 V-RIBBED BELT 01183383 01182478
For an TCD2013 engine equipped with a belt, the manufacturer should replace the 01182478 belt and accessories regularly within the specified period. Generally, it should be replaced when the vehicle travels to 60,000 to 100,000 kilometers.
Send Email Details -
TCD2013 BFM1013 Alternator AAK5565 01183626 01183443
Voltage [V]: 28 V
Send Email Details
Alternator Charge Current [A]: 55 A
Pulleys:without belt pulley
Rotation Direction: Clockwise rotation
Bore Ø [mm]: 8,2 mm
Mounting bores distance [mm]:56,0 mm
Mounting points diameter [mm]:90,0 mm
Connector / Clamp:W
Dust Cover: with dust cover
Number of mounting bores:2 -
BFM1013 TCD2012 FL913 FL914 L06 starter 01183716
1) 01183716 starter could provide enough starting torque to ensure that the starting resistance torque of the engine can be overcome under a certain ambient temperature to make the crankshaft rotate.
Send Email Details
2) 01183716 starter have the ability to drive the engine above the low starting speed, that is, the starter must have enough power to make it have enough speed to start the engine smoothly when it overcomes the average resistance torque of the engine.
3. 01183716 starter is 24v 4kw 9T,apply to Iveco,Deutz (Khd), Bomag, Atlas Copco. -
EC290 D7E TCD2013 L06 2V Rail 04903528 04902882 0445226047
In addition to the electronic fuel pump, filter, fuel injection valve and pressure regulator, the fuel rail is also part of the fuel supply system, and under any operating conditions, the fuel rail will always provide a certain amount of fuel to the engine.
Send Email Details
Our common rail Rail 04903528 is original.
