-
D4D BF4M2012 Lubrication oil pump 20726088 04283992 04502446
04502446 oil pump is to press the oil in the BF4M2012 oil pan to the oil filter, so that the oil can be reliably transported to each lubricating oil passage and the friction surface of each moving part after passing through the oil filter. When the engine is working, 04502446 oil pump works continuously to ensure that the oil circulates continuously in the lubricating oil circuit.
Send Email Details
Our oil pumps are brand new, with reliable quality, no oil leakage and low oil pressure defects. -
EC140BLC excavator D4D engine cable harness 04213755
The 04213755 wiring harness of diesel electric control system is the carrier of power supply and various signals. The main functions of the harness are as follows.
Send Email Details
a. The vehicle and engine running status signals collected by sensors, switches, etc., such as temperature, pressure, speed and other electrical signals, are transmitted to the ECU.
b. The ECU judges, analyzes, calculates and converts the control instructions according to the input information to the actuator.
c. Provides battery power to the engine control system.
The D4D 04213755 harness generally includes the main wiring harness and the branch wiring harness. A diesel engine main wiring harness has multiple branch wiring harnesses. The basic components of the wiring harness are: connectors, terminals, wires, tapes, protective sleeves, fasteners, multi-way connectors, relays and fuses. -
EC140 D4D BF4M2012 Piston set 04501366 04258457 04501357
Bolt Ø [mm]:38 mm
Send Email Details
Bolt length [mm]:76 mm
Cylinder Piston Diameter [mm]:101 mm
Compression Height [mm]:50,6 mm
Length [mm]:86,1 mm
Recess Depth 1 [mm]:18 mm
Recess Diameter [mm]:61 mm
Standard Size [STD] -
EC140 BFM2012 Fan support 04297412 04295080 04285767
There is a good fit between the drive belt and the 04297412 fan pulley. The wheels are placed against the belt to maintain proper tension between the belt and the pulley to prevent the belt from slipping.
Send Email Details -
EC140 D4D BF4M2012 Engine Speed Sensor 01182834
Independent non-contact active sensor 01182834 that provides speed and direction of the drive shaft by detecting the rotation of ferromagnetic or magnetic encoder wheels mounted on the input and output shafts.
Send Email Details -
D4D TCD2012 BFM2012 Set of piston rings 04501092
The piston ring 04501092 has a metal elastic ring with a large outward expansion deformation, which is assembled into an annular groove corresponding to its cross section. Reciprocating and rotating piston rings rely on the pressure difference of gas or liquid to form a seal between the outer circular surface of the ring and the cylinder and one side of the ring and the ring groove.
Send Email Details -
D4D BF4M2012 TCD2012 V-rib.belt pulley 04254513
04254513 water pump pulley is suitable to deutz BFM2012 ,Volvo EC140 excavator ,D4D engine
Send Email Details
The engine drives the water pump bearing and the impeller to rotate through the pulley, and the coolant in the water pump is driven by the impeller to rotate together.
At the center of the impeller, the cooling liquid is thrown out and the pressure is reduced. The cooling liquid in the water tank is sucked into the impeller through the water pipe under the action of the pressure difference between the inlet of the pump and the center of the impeller to realize the reciprocating circulation of the cooling liquid. -
EC140 D4D TAD420VE engine parts crankshaft 20891184 20744682
Our 20891184 crankshaft has sufficient strength and rigidity. It connect the connecting rod and other components, and transmit the movement of the connecting rod to other accessories to drive the engine to work.
Send Email Details
The crankshaft is subjected to the combined action of centrifugal force, gas inertial force and transmission inertial force during operation, and the crankshaft can withstand bending and torsional loads for a long time. -
D4D BFM2012 TCD2012 Connecting rod bearing std 02931406 02931223
Our 02931406 big end bearing (connecting rod bearing )is made of copper-based alloy material with strong bearing capacity, and the inner surface of the bearing bush is electroplated with a wear-reducing layer, so that the bearing bush has a stronger bearing capacity and higher friction resistance.
Send Email Details
