-
04506191
04506191 is an oil cooler for Deutz engines. It is used to cool the engine oil, which helps to prevent the oil from overheating and breaking down. The oil cooler is made of a high-quality material that is resistant to oil and heat.
Send Email Details
The 04506191 oil cooler is used in a variety of Deutz engines, including the following:
Deutz TCD 2013 L4/L6 2V
Deutz BF4M2013
Deutz BF6M2013 -
04284043
04284043 is an exhaust valve for Deutz engines. It is a precision-machined component that is made of high-quality materials. The exhaust valve helps to control the flow of exhaust gases out of the engine.
Send Email Details
The exhaust valve is located in the cylinder head. It is a cylindrical component with a head and a stem. The head of the valve fits into the combustion chamber, and the stem fits into the valve guide. When the valve opens, it allows exhaust gases to flow out of the combustion chamber. -
04251064
04251064 is a valve tappet for Deutz engines. It is a precision-machined component that is made of high-quality materials. The valve tappet helps to keep the valve in the correct position and to prevent it from rubbing against the camshaft.
Send Email Details
The valve tappet is located in the cylinder head. It is a cylindrical plunger that fits over the valve stem. The valve tappet helps to convert the rotary motion of the camshaft into linear motion of the valve stem. This allows the valve to open and close at the correct time.
The 04251064 valve tappet is used in a variety of Deutz engines, including the following:
Deutz 1012
Deutz 2012
Deutz 2011
If the valve tappet is damaged or worn, it can cause the valve to not open or close properly. This can lead to decreased engine performance and increased emissions. The 04251064 valve tappet can be used to replace a damaged or worn valve tappet and restore the engine to normal operation.
Here are some things to consider before replacing the valve tappet:
The engine should be properly warmed up before attempting any repairs.
The valve tappet should be properly matched to the valve stem.
The correct torque specifications should be followed when installing the new valve tappet.
Finally, check the system for leaks prior to operation. -
01182834
Deutz speed sensor 01182834. It is a sensor that measures the rotational speed of the engine. This information is used by the engine control unit to control the fuel injection and ignition.
Send Email Details
The 01182834 sensor is a Hall effect sensor. This means that it uses a magnetic field to generate an electrical signal. The sensor has a magnet that is mounted on the engine flywheel. As the flywheel rotates, the magnet passes by a Hall effect sensor. This generates an electrical signal that is sent to the engine control unit.
The engine control unit uses the signal from the 01182834 sensor to determine the rotational speed of the engine. This information is used to control the fuel injection and ignition. If the sensor fails, the engine may not start or may run poorly.
Here are some of the symptoms of a bad speed sensor:
The engine does not start.
The engine runs poorly.
The check engine light comes on.
The engine speed gauge reads incorrectly. -
04253372
The 04253372 oil seal is made from a high-quality rubber compound that is resistant to oil, grease, and other fluids for BFM2012 Engine.
Send Email Details -
04253332
The 04253332 oil seal is made from a high-quality rubber compound that is resistant to oil, grease, and other fluids for BFM2012 Engine.
Send Email Details -
04289410
Compatible with Deutz engines: The 04289410 is compatible with a variety of Deutz engines, including the BF 6M 2012 C, BF 6M 2012 C*, and TCD 2012 L6 2V.
Send Email Details
High-quality materials: The 04289410 is made from high-quality materials that are designed to withstand the rigors of engine operation. -
04289407
Genuine Deutz part
Send Email Details
12-month warranty
Made of steel
Meets TS16949 and ISO 9001 standards
Suitable for a variety of applications, including excavators, tractors, and trucks
Weight: 0.6 kg
This gasket is designed to seal the combustion chamber and prevent leaks. It is made of high-quality steel and is manufactured to strict standards. The gasket is also backed by a 12-month warranty.
Some of the applications for this gasket include:
Deutz BF4M2012 engine
Deutz TCD2012 engine
Deutz D4D engine
Deutz D4E engine
Deutz TAD420 engine
Deutz TD420 engine -
deutz bf4m2012c parts
The Deutz BF4M2012C is a 4-cylinder, 4-stroke, water-cooled diesel engine that is available in both naturally aspirated and turbocharged versions. It is a popular engine for use in a variety of applications, including construction equipment, agricultural machinery, and power generation.
Send Email Details
