-
engine d6d
The D6D engine assembly is a high-performance, four-cylinder, four-stroke diesel engine that is designed for use in a variety of applications, including construction equipment, agricultural machinery, and power generation. The engine is known for its durability, reliability, and fuel efficiency.
Send Email Details -
EC210 D6D BF6M2012 Fuel supply pump 20524154 20518337 04503576
Our fuel Pump 04503576 ensure that the diesel oil circulates in the low-pressure oil circuit, and supply sufficient quantity and certain pressure of fuel to the fuel injection pump, and its fuel delivery volume should be 3-4 times the maximum fuel injection volume at full load.
Send Email Details
Features:
1. The oil inlet and outlet valves of the diesel engine oil pump have good sealing performance.
2 The oil inlet pipe joints are of excellent quality. -
EC210 Excavator D6D Engine wiring Harness 20728258
The 20728258 wiring harness of the diesel electronic control system is the carrier of power supply and various signals, and is the bridge between the control unit ECU and the excavator or truck and EC210 Excavator D6D engine for information exchange and control.
Send Email Details
Terminals need to have excellent structure, stable and reliable contact retention and good electrical conductivity. The tape for diesel engine wiring harness has the characteristics of oil resistance and temperature resistance.The protective sleeve mainly includes heat shrinkable tube and corrugated tube. Other external materials of the wire harness such as fasteners, snap rings, trip pins, etc. should be selected with sufficient strength and thermal stability. -
BFM1013 BFM2012 TCD2015 TCD2013 D6D oil pressure sensor 04215774 04213020
04215774 Oil pressure sensor is a device that converts pressure signal into electrical signal through piezoresistive effect. Generally speaking, the sensor open circuit is generally due to the disconnection or poor contact of the sensor connecting wire, which causes the 04215774 oil pressure sensor to stop working because it cannot receive the transmission signal. If the oil alarm display appears at the same time, it means that the diesel engine is short of oil or the oil pressure is low, which means that there may be a serious engine failure. At this point, it is necessary to stop the vehicle to check the cause of the failure.
Send Email Details -
D6D Temperature gauge 01182573 01181800
The temperature gauge 01182573 temperature displayed on the instrument panel is the temperature of the D6D engine cooling water.
Send Email Details -
D6D BF6M2012 Piston set 04258283 04501365 04252842
Cylinder Bore [mm]:98,0 mm
Send Email Details
Length [mm]:91 mm
Compression Height [mm]:50,65 mm
Recess Depth 1 [mm]:17,5 mm
Recess Diameter [mm]:61,06 mm
Bolt length [mm]:76 mm
Bolt Ø [mm]:38 mm
Machined:with cut-out for oil jet
Surface:Coated
Supplementary Article/Info 2:with piston ring carrier
Supplementary Article/Info 2:without cooling duct
Connecting Rod Design:Trapezoidal Connecting Rod
Production Number:98 L 96
Piston Clearance [mm]:0,10 mm -
D6D BF6M2012 Fan bracket 04500926 04506522 04299931
Fan bracket 04500926 is used to install the fan and transmit power.
Send Email Details -
EC240 D6D BFM2012 Fan support 04295077 04282239 04297409
04295077 fan pulleys is an important part of D6D engines and generate excess heat. This heat must be dissipated to prevent the D6D engine from overheating and burning its lubricating oil. Water circulates through the interior of the engine and is pumped into the radiator, which absorbs heat from the water. A fan, usually driven by a 04295077 fan pulley, is mounted close to the radiator.
Send Email Details -
D6D D6E BFM2012 TCD2012 V-rib.belt pulley 04254511
OE number :04254511
Send Email Details
Apply to volvo EC210 excavator , Deutz D6D/D6E /BFM2012/TCD2012 engine.
The size of the water pump pulley as below :
Outer diameter is 98 mm ,
Width is 41.00 mm ,
There are three holes on the body
