-
TCD2013 L06 4V TCD2012 L06 4V Oil cooler core 04915767 04900206 04912105
04915767 oil coolers are of great quality and have an excellent ability to cool the oil. 04900206 oil cooler can quickly reduce the temperature of the Deutz BF6M2012 engine oil, so as to control the oil consumption for users and prevent the oil from being oxidized.
Send Email Details
04900206 is Plate Fin Oil Cooler，made of aluminum alloy. It has competitive price and good cooling.It apply to volvo penta TAD series,and Volvo Truck DXI7 and Bus B7R D7E. -
BF6M1013 TCD2013 oil cooler core 04209932 04205739 04288127 04288128 04209930
04209932 oil coolers are of great quality and have an excellent ability to cool the oil. This oil cooler can quickly reduce the temperature of the Deutz BF6M1013 engine oil, so as to control the oil consumption for users and prevent the oil from being oxidized.
Send Email Details
04288127 is Plate Fin Oil Cooler，made of aluminum alloy. It has competitive price and good cooling.
Length [mm] : 250 mm
Width [mm] : 8 mm
Height [mm]: 114 mm -
BFM1013 TCD2013 FL912 FL914 starter 01180999 01182931 01173241 01183122 01183239
1) 01180999 starter could provide enough starting torque to ensure that the starting resistance torque of the engine can be overcome under a certain ambient temperature to make the crankshaft rotate.
Send Email Details
2) 01180999 starter have the ability to drive the engine above the low starting speed, that is, the starter must have enough power to make it have enough speed to start the engine smoothly when it overcomes the average resistance torque of the engine.
3. 01180999 starter is 24v 4kw . -
TCD2013 L06 4 V engine V-grooved pulley 04901983
The 04901983 fan pulley is connected to the fan's pulley. Pulleys are metal or hard plastic pulleys with grooved outer rims. The grooves are V-shaped. When the belt moves, the pulley rotates, and the pulley turns the hub and rotates the attached fan blades.
Send Email Details -
D7F TCD2013 4v engine Inlet valve 04903005 04900685 20833932
Valve head diameter [mm]: 38,2 mm
Send Email Details
Valve stem diameter [mm]: 8 mm
Length [mm]: 145,9 mm
Supplementary Article/Info 2: Chromed valve stem Valve seat angle [°]: 30 °
Supplementary Article/Info 2: Armoured Valve Seat
Supplementary Article/Info 2: Valve stem tip hardened -
TCD2013 L06 4V Roller tappet 04909191 04908627
The TCD2013 L06 4V fuel supply system of the electronically controlled unit pump mainly drives the up and down movement of the 04909191 tappet at the lower end of the plunger of the unit pump by the cam to drive the plunger to reciprocate in the plunger cavity, so as to realize fuel compression and oil pressure establishment.
Send Email Details -
TCD2013 2V Exhaust valve 04285957 04283709 04290025
The function of the exhaust valve 04285957 is to discharge the burned exhaust gas and dissipate heat.
Send Email Details
Valve head diameter [mm]: 42 mm
Valve stem diameter [mm]: 9 mm
Length [mm]: 135,5 mm
Material: Bi-metal
Supplementary Article/Info 2: Chromed valve stem Valve seat angle [°]: 45 °
Supplementary Article/Info 2: Valve stem tip hardened Valve Seat Material: Bi-metal -
TCD2013 L04 2V inlet valve 04285263
The function of the 04285263 valve is to input air into the engine and discharge the exhaust gas after combustion.
Send Email Details
Valve head diameter [mm]: 48 mm
Valve stem diameter [mm]: 9 mm
Length [mm]: 135,5 mm
Supplementary Article/Info 2: Chromed valve stem Valve seat angle [°]: 30 °
Supplementary Article/Info 2: Armoured Valve Seat
Supplementary Article/Info 2: Valve stem tip hardened -
EC240 TCD2012 Crankshaft Position Sensor 04199447 20450707
EC240 Independent non-contact active sensors provide crankshaft position 20450707 and rotational direction by reading a ferromagnetic or magnetic encoder wheel mounted on the engine crankshaft.
Send Email Details
For stop/start function and misfire detection for emission compliance.
