-
DEUTZ BFM2012 TCD2012 V-grooved pulley 04282818
1. Apply to BFM2012 TCD2012 deutz engine 2.Outer size : 170MM 3.Inner size : 95.80 MM 4.Bore size：9MM 5.Material： Alloy steel
Send Email Details -
TCD2012 V-grooved pulley 04282817
The TCD2012 V-grooved pulley 04282817 is well-made, effectively reducing the risk of abnormal belt jitter, and at the same time, the belt tension can be automatically changed according to the changes in the operation of the entire wheel train, so that the belt tension is always guaranteed to be sufficient. The excellent design of the 04282817 pulleys prevents excessive or premature wear of the belt system.
Send Email Details -
BF6M1013 V-grooved pulley 04502511
This pulley is suitable to Deutz BFM1013 and TAD720 engine. It is located on the end of the crankshaft, on the chain or on the timing belt. It is attached to it by a hole, and a set screw or nut. It consists of a hub with a peripheral section that houses an accessory strap. Its role is twofold: suppresses transmission chatter to prolong the life of the vehicle's engine, and ensures that the rotational motion of the engine is transmitted through the auxiliary belt.
Send Email Details -
BFM1013 V-grooved pulley 04209101
04209101 water pump pulley is subitale to deutz BFM1013 engine . The material is iron Water pump's pulley is designed to transfer the drive belt's movement into the bearing spindle. The pulley receives the engine traction and acts as a medium between the two, mediating the amount of torque that goes through.
Send Email Details -
BF4M1013 BF6M1013 V-grooved pulley 04251297
This 04251297 V-grooved pulley is used to help hold the belt in place as it rotates around the pulley. The belt itself will be designed to work with grooved pulleys, creating a system that reduces belt slippage or disassembly.
Send Email Details -
TAD721 BFM1013 V-grooved pulley 04208470 04207054
BFM1013 engine drives the water pump bearing and the impeller to rotate through the pulley, and the coolant in the water pump is driven by the impeller to rotate together, and is thrown to the edge of the water pump shell under the action of centrifugal force,。 Generating a certain pressure at the same time, and then flows out from the water outlet or water pipe. At the center of the impeller, the pressure is reduced due to the cooling liquid being thrown out. The cooling liquid in the water tank is sucked into the impeller through the water pipe under the action of the pressure difference between the inlet of the pump and the center of the impeller to realize the reciprocating circulation of the cooling liquid.
Send Email Details -
TCD2012 BFM2012 V-grooved pulley 04254567
BFM2012 V-grooved pulley 04254567 engine pulley is a wheel mounted on the engine that guides or drives the belt.
Send Email Details
