-
BFM1015 TCD2015 V06 upper valve cover gasket 04224392
When replacing the 04224392 valve cover gasket, note the following: 1. When replacing, thoroughly clean the contact surface. 2. The engine must be completely cooled before replacement. 3. When installing the valve cover, tighten it diagonally several times. That is, after fixing one screw, then fix the opposite screw. This prevents uneven stress on the 04224392 valve cover gasket.
Send Email Details -
BFM1013 BFM1015 Oil Pressure Sensor Transmitter 04199823 04199823
The 04199823 oil pressure sensor measures the BFM1015 oil pressure, and outputs it to the ECU, and then to the oil pressure gauge to display; when the oil pressure is too low, the ECU will give an alarm and take control measures to protect the engine. Advantages of BFM1015 Transmitter 04199823 is accuracy ±0.25 ~ ±5%FS (including nonlinearity, hysteresis and repeatability, full temperature range).
Send Email Details -
BFM1015 BFM1013 Pressure Sensor 04217188 04216645
The BFM1013 engine boost pressure sensor 0421718 has high measurement accuracy, and the ECU can accurately measure the engine intake pressure. The product has good reliability and long service life, and is suitable for working in harsh environments; the ceramic capacitive structure has good compatibility with the measurement medium.
Send Email Details -
BFM1015 engine piston set 04226170 04264355 04260933
Bolt Ø [mm]:52 mm Bolt length [mm]:110 mm Cylinder Piston Diameter [mm]:132,01 mm Compression Height [mm]:86,8 mm Length [mm]:133,8 mm Recess Depth 1 [mm]:18,77 mm Recess Diameter [mm]:84 mm Standard Size [STD]
Send Email Details -
BF8M1015 S300 Turbocharger 04226496 03046136 T914305
The turbocharger BF8M1015 can significantly increase the power and torque of the diesel engine under the condition of the same structure and size, and at the same time reduce the fuel consumption and reduce the exhaust pollution, especially in the plateau area. During the working process, the speed of the Turbocharger is as high as tens of thousands of revolutions per minute, and it runs under the high temperature of the exhaust gas for a long time. So our BF8M1015 Turbocharger can withstand extremely high temperatures and the material is more resistant to wear.
Send Email Details -
BFM1015 engine cylinder liner 04262182 04227080
SIZE Cylinder Bore [mm]:132,0 mm Outer diameter [mm]:147,0 mm Length [mm]:269 mm Height [mm]:9,0 mm Flange Ø [mm]:158,0 mm Top land height[mm]:1,25 mm Design:Soft Material Gasket Cylinder:without cylinder liner ring Supplementary Article/Info 2: Wet Cylinder Sleeve
Send Email Details -
TCD2015 BFM1015 CONNECTING ROD 04220829 04226240
04220829 CONNECTING ROD SIZE: Length [mm]:262 mm Bore Ø [mm]:92 mm Bolt Ø [mm]:52 mm Our connecting rod 04220829 has good lubrication effect and long service life. Our 04220829 can make the vibration amplitude of the diesel engine small, and the noise when the engine is running is extremely small, which can prolong the service life of the diesel engine crankshaft.
Send Email Details
