-
BF6M2012 engine Exhaust Valve 04284043
The Exhaust Valve 04284043 is composed of a valve head and a stem. High strength, high stiffness, and excellent heat and wear resistance. 04284043 adopts heat-resistant alloy (silicon-chromium steel).
Send Email Details -
BF4M2012 Inlet Valve 04284042
Valve head diameter [mm]: 41,7 mm
Send Email Details
Valve stem diameter [mm]: 8 mm
Length [mm]: 121,2 mm
Supplementary Article/Info 2: Chromed valve stem Valve seat angle [°]: 30 °
Supplementary Article/Info 2: Valve stem tip hardened -
BFM1012 BFM1013 OIL PRESSURE SWITCH 01182798 01182792 01182227
The function of the 01182798 oil pressure sensor is to inform the ECU of the pressure of the main oil passage of the BFM1013 engine oil.
Send Email Details -
BFM2012 TCD2013 BFM1013 speed sensor Impulsetransmitter 01182850
The BFM1013 engine speed sensor 01182850 , also known as the crankshaft phase sensor, is one of the most important sensors in the automatic control system of the EFI engine.
Send Email Details -
EC210 BFM2012 TCD2012 Manifold pipe 04254337 20459248
When the manifold pipe 04254337 is behind the valve, when TCD2012 the engine throttle is opened, the cylinder cannot absorb enough air, resulting in high manifold vacuum; and when the TCD2012 engine throttle is large, the vacuum in the intake pipe will become smaller. Therefore, heat the engine. A pressure gauge is installed on the intake pipe, which distributes the ECU to filter the engine load, and the fuel injection.
Send Email Details -
BFM2012 Rot.shaft lip seal 04253372 04502202
The role of engine 04253372 oil seal
Send Email Details
1. Prevent oil loss, resulting in oil burning.
2. Prevent the leakage of gasoline, mixed gas with air and exhaust gas. -
BFM2012 Rot.shaft lip seal 04502203 04253332
Size:120*140*13mm
Send Email Details
The BFM2012 Rot.shaft lip seal 0450220 is a mechanical component that seals grease, and its main function is to prevent the leakage of lubricating oil. -
BF6M2012E BF6M1012E engine Water thermostat 04203359
The function of the 04203359 thermostat is to be in a closed state before the temperature of the car has reached the normal temperature. At this time, the coolant of the engine is returned to the engine through the water pump, and a small cycle in the engine is carried out to make the engine heat up quickly. When it exceeds the normal temperature, it can be opened, allowing the coolant to circulate through the entire water tank radiator circuit to quickly dissipate heat.
Send Email Details -
BFM2011 BFM2012 TCD2013 Valve Stem Seal 04153728 20459855
Valve stem diameter [mm]:8 mm
Send Email Details
Inner diameter [mm]:12 mm
Outer diameter [mm]:15,4 mm
Height [mm]: 9,5 mm
