-
BFM1013 TCD2013 TCD2.9 Camshaft position sensor 20482772 04194021
The TCD2013 Engine Management System (EMS) uses the output signal to determine the position of the engine at startup and to control the VVT variable valve timing actuator.
Send Email Details -
EC240 TCD2012 Crankshaft Position Sensor 04199447 20450707
EC240 Independent non-contact active sensors provide crankshaft position 20450707 and rotational direction by reading a ferromagnetic or magnetic encoder wheel mounted on the engine crankshaft. For stop/start function and misfire detection for emission compliance.
Send Email Details -
BFM2012 TCD2013 BFM1013 speed sensor Impulsetransmitter 01182850
The BFM1013 engine speed sensor 01182850 , also known as the crankshaft phase sensor, is one of the most important sensors in the automatic control system of the EFI engine.
Send Email Details -
EC140 D4D BF4M2012 Engine Speed Sensor 01182834
Independent non-contact active sensor 01182834 that provides speed and direction of the drive shaft by detecting the rotation of ferromagnetic or magnetic encoder wheels mounted on the input and output shafts.
Send Email Details -
BFM1013 oil Pressure gauge 24V 01182581 01181804
The oil pressure gauge 01182581 is used to indicate the lubricating oil pressure of the main oil passage of the lubrication system when the engine is running.
Send Email Details -
BFM1015 Pressure sensor 04199478 04199823
The 04199478 oil pressure sensor consists of a thick film pressure sensor chip, a signal processing circuit, a casing, a fixed circuit board device, and two leads (signal line and alarm line). The signal processing circuit is composed of power supply circuit, sensor compensation circuit, zero adjustment circuit, voltage amplifier circuit, current amplifier circuit, filter circuit and alarm circuit.
Send Email Details -
BFM2012 BFM1013 Water temperature sensor 04199809 04213839
The 04199809 water temperature sensor is installed on the cylinder block to detect the temperature information of the engine cooling water, and convert the information into an electrical signal and provide it to the control unit.
Send Email Details -
TCD2015 TCD2013 TCD2012 TCD6.1 Sensor cable 04504704
The Sensor cable 04504704 is installed in the water jacket of the engine block or in the coolant pipeline, and is in contact with the coolant to detect the coolant temperature of the engine. After receiving the temperature signal, the ECU corrects the fuel injection time and ignition time.
Send Email Details
