-
02108102
The part number 02108102 is a valve collet for Deutz engines. It is a small, cylindrical component that is made of a high-quality steel. The valve collet helps to hold the valve stem in place in the valve guide.
Send Email Details
The valve collet is located in the cylinder head, between the valve stem and the valve guide. It is held in place by a spring or a clip. The valve collet prevents the valve stem from moving too far in or out of the valve guide. This helps to ensure that the valve seats properly and that the engine runs smoothly. -
04283380
04283380 is an inlet valve for Deutz engines. It is a precision-machined component that is made of high-quality materials. The inlet valve helps to control the flow of air into the engine.
Send Email Details
The inlet valve is located in the cylinder head. It is a cylindrical component with a head and a stem. The head of the valve fits into the combustion chamber, and the stem fits into the valve guide. When the valve opens, it allows air to flow into the combustion chamber.
The 04283380 inlet valve is used in a variety of Deutz engines, including the following:
Deutz 1013
Deutz 2013
Deutz 2011
If the inlet valve is damaged or worn, it can cause the engine to run poorly or not at all. The 04283380 inlet valve can be used to replace a damaged or worn inlet valve and restore the engine to normal operation.
Here are some things to consider before replacing the inlet valve:
The engine should be properly warmed up before attempting any repairs.
The inlet valve should be properly matched to the engine.
The correct torque specifications should be followed when installing the new inlet valve.
Finally, check the system for leaks prior to operation. -
04283381
04283381 is an exhaust valve for Deutz engines. It is a precision-machined component that is made of high-quality materials. The exhaust valve helps to control the flow of exhaust gases out of the engine.
Send Email Details
The exhaust valve is located in the cylinder head. It is a cylindrical component with a head and a stem. The head of the valve fits into the combustion chamber, and the stem fits into the valve guide. When the valve opens, it allows exhaust gases to flow out of the combustion chamber.
The 04283381 exhaust valve is used in a variety of Deutz engines, including the following:
Deutz 1013
Deutz 2013
Deutz 2011
If the exhaust valve is damaged or worn, it can cause the engine to run poorly or not at all. The 04283381 exhaust valve can be used to replace a damaged or worn exhaust valve and restore the engine to normal operation.
Here are some things to consider before replacing the exhaust valve:
The engine should be properly warmed up before attempting any repairs.
The exhaust valve should be properly matched to the engine.
The correct torque specifications should be followed when installing the new exhaust valve.
Finally, check the system for leaks prior to operation. -
04250074
04250074 is a valve guide for Deutz engines. It is a precision-machined component that is made of high-quality materials. The valve guide helps to keep the valve in the correct position and to prevent it from rubbing against the cylinder head.
Send Email Details
The valve guide is located in the cylinder head. It is a cylindrical tube that fits over the valve stem. The valve guide helps to guide the valve stem and to prevent it from rubbing against the cylinder head. The valve guide also helps to seal the combustion chamber and to prevent gases from escaping. -
02931532
02931532 is a main bearing for Deutz engines.The main bearing is located between the crankshaft and the engine block. It helps to reduce friction and wear between these two components. The bearing also helps to absorb shock loads and vibrations.
Send Email Details -
04901179
04901179 is a connecting rod bearing for Deutz engines. The connecting rod bearing is located between the connecting rod and the crankshaft. It helps to reduce friction and wear between these two components. The bearing also helps to absorb shock loads and vibrations.
Send Email Details -
04297148
This repair kit is used to repair the fuel pressure sensor assembly in Deutz engines. The fuel pressure sensor assembly is located in the high pressure fuel rail. The fuel pressure sensor assembly measures the fuel pressure in the high pressure fuel rail and sends this information to the engine control unit (ECU). The ECU uses this information to control the fuel injection system.
Send Email Details
If the fuel pressure sensor assembly is damaged or worn, it can cause the engine to run poorly or not at all. The 04297148 repair kit can be used to repair the fuel pressure sensor assembly and restore the engine to normal operation. -
04199809
04199809 is a Deutz water temperature sensor. It is a sensor that measures the temperature of the engine coolant. This information is used by the engine control unit to control the cooling system.
Send Email Details
The 04199809 sensor is a thermistor. This means that it changes its resistance depending on the temperature. The sensor has a probe that is immersed in the engine coolant. As the coolant temperature changes, the resistance of the sensor changes. This change in resistance is measured by the engine control unit.
The engine control unit uses the signal from the 04199809 sensor to determine the temperature of the engine coolant. This information is used to control the cooling system. If the sensor fails, the engine may overheat. -
04213578
04213578 is a Deutz camshaft position sensor. It is a sensor that measures the position of the camshaft in the engine. This information is used by the engine control unit to control the timing of the fuel injection and ignition.
Send Email Details
The 04213578 sensor is a Hall effect sensor. This means that it uses a magnetic field to generate an electrical signal. The sensor has a magnet that is mounted on the camshaft. As the camshaft rotates, the magnet passes by a Hall effect sensor. This generates an electrical signal that is sent to the engine control unit.
The engine control unit uses the signal from the 04213578 sensor to determine the position of the camshaft. This information is used to control the timing of the fuel injection and ignition. If the sensor fails, the engine may not start or may run poorly.
